United States Department of Agriculture
Natural Resources Conservation Service		 Illinois Go to Accessibility Information
Skip to Page Content



Illinois NRCS Engineering Standard Drawings

Temporary Erosion Control

NOTICE—The following standard drawings have been developed to assist in the design of typical NRCS engineering practices in Illinois. Before using any of the standard drawings or details, the designer should verify that the standard applies to the site and that the design limitations are not exceeded. Standard drawings are to be adapted as part of site specific designs that shall be reviewed and approved by qualified individual with appropriate approval authority.

The files listed below are available in following formats:

1. DWG - AutoCAD drawing.  To save a dwg file, point at the underlined hyperlink, then SHIFT + LEFT CLICK
2. DXF - Drawing Exchange Format generic CAD drawing. 
3. PDF - Adobe Acrobat Reader for viewing and printing only (no editing).
4. DWF - AutoDesk DWF Viewer for viewing and printing only (no editing).

Date IL-ENG-#
Illinois NRCS Engineering Drawing Title AutoCAD
DWG 		DXF CAD PDF AutoCAD
DWF 
7/05 Silt Fence 49.dwg 49.dxf 49.pdf 49.dwf
7/05 Silt Fence with Wire Support 50.dwg 50.dxf 50.pdf 50.dwf
7/05 Straw Bale Barrier Sediment Control 51.dwg 51.dxf 51.pdf 51.dwf
7/05 Temporary Vegetated Swale Plan 57.dwg 57.dxf 57.pdf 57.dwf
7/05 Construction Road Stabilization 58.dwg 58.dxf 58.pdf 58.dwf
7/05 Culvert Inlet Protection Silt Fence 59.dwg 59.dxf 59.pdf 59.dwf
7/05 Culvert Inlet Protection Stone 60.dwg 60.dxf 60.pdf 60.dwf
7/05 Erosion Blanket Installation Details 61.dwg 61.dxf 61.pdf 61.dwf
8/05 Level Spreader 62.dwg 62.dxf 62.pdf 62.dwf

<Back to Categories...

Last Modified May 21, 2008
By Manny Quinones, USDA-NRCS
Email: manuel.quinones@il.usda.gov